Prodcut Catalog
Groove Milling Machine
CNC Flame / Plasma cutting machine
Groove Milling Machine
Welding Rotator
Self Alignment Rotators
Conventional Rotators
Pipe Rotators
Welding Manipulators
Welding Positioner
Longitudinal Seam Welder
Light Pole Automatic Welder
H-beam Productions Line
Common H-beam Productions Line
Automated H-beam Productions Line
Box-column Productions Line

Conventional Tanks Rotator / Turning Rolls

Conventional Tank Turning Rolls (WR Series conventional welding rotator )

     WR series Conventional Tank Turning Rolls is suitable for welding the longitudinal and circle seams of round tanks, the tanks were loaded on the conventional welding rotators. The wheels of the conventional rotator center to center distance was adjusted according to the diameter of the cylinder by workers. 

      Conventional tank turning rolls also known as: Conventional Rotators, Conventional Welding RotatorsTank Rotators, Welding Rotators, Welding Tank Turning Rolls,Tank Rollers, Welding Rollers, Welding Rolls, Vessel Rollers, Tank Rolls, Turning Rolls, Rotador Soldadura, Virador Soldadura, Rotores Tanques, Rotador Tanques, Rotador Tuberia, Rodillos Dirección, Rotores Tuberías, Rotores Cilindros, Rotador Soldagem, Rolos Giro

Shopping Guide:

1、How to choose" Loading capacity of tank turning rolls " ?

  Although the loading capacity safety factor of our welding rotator is over 1.3, but we still hope that the weight of tanks(cylinders) does not exceed 80% of our model. If the tank turning roll is used under the limit loading capacity for a long time, its service life will be reduced. 

  Taking WR100 welding rotator as an example: Design ultimate load capacity is over than 130 tons, safe loading capacity is 100 tons, the recommended weight of the cylinder is 80 tons .

2、Why do we require sufficient allowance for the load capacity of the welding rotator?

   A set of tank turning roll is consists of an active rotator and a passive rotator. When the cylinder is placed on the two units, there may be a phenomenon of weight deviation. This will result in one of the rotator having a larger load capacity.

3、How to choose welding rotators for very long tanks ?

   For longer tanks, we can configure multiple welding rotators, such as one active and two passive or multiple active and passive for supporting and driving. 

4、How to choose a welding rotator for thin walled cylinder with large diameters and light weight?

     This type cylinder can use an adjustable turning rolls, but it is best to use a dual drive self-adjusting turning rotator.

5、Why do large cylinders often use adjustable tank turning rolls?

      Dual motor drive, with greater driving torque;Distance of two roller is larger, making it look safer;Suitable for a wide range of cylinder diameters

  Main Technical  Parameters  


1、 Remote control box(by hand):wire   /   wireless 

2、Wheels material: Rubber with 2 metal wheels clamping    /   PU material  /  45# forging  steel 

3 、Control motor:Two motors with 2 reducers    

4、Power  /  Idler moving: by hand  /  by  motor

5、Wheels Center to Center distance adjust type:Manual  (Screw / bolts fix )  Motorized 、  Hydraulic 

Welding rotator ,Turning rolls, Welding positioner, Welding manipulator, Column and Boom, Light pole welding machine, H beam Welding Line