Head & Tail Style Welding Positioner with 2 driving overturn (HT Series)
This machine have a big working-table, we may fix the workpiece diameter more than 3000 mm ,The customer produce nuclear reactor cooling device in the nuclear electric plant
Head and tail welding positioner mainly used for changing the workpiece position . let the welding seam in a good position .
Attention : The rotation center height to the ground is fixed , but the tail may may move on the ground or bed.
This type machine often be produced according to customer's special requirement. Buyer must supply the workpiece basic technical dates to my factory .Then we will design for you and produce.
Main Technical Parameters(Standard)
Product Application:
With the working bench lifting up or down, turning and tilting, the work piece stays in the best position for being welded or assembled.
Product Advantage:
1. The VFD drive brand as Schneider ,France brand.
2. The motor brand as Siemens , Germany brand
3. Lower voltage electrical components brand as Schneider , France brand
4. The machine by shot blasting to remove steel rust
Competitive Advantage:
1.Convenient, high efficiency
2.high quality
3.Reasonable price
4.good service
HT15 Tons / Head & Tail / Overturning / Rotary / Machine bed /
HT5 Tons / Head & Tail / Overturning / Hydraulic Brake / Machine bed
HT15 Tons / Head & Tail / Overturning / Rotary / Machine bed
HT30 Tons / Head & Tail / Overturning / Rotary / Machine bed
Prodcut Catalog
