Our factory is specially in producing the pole clamping and welding machine.
The pole was widely used in the city and road.
It is suitable for one piece type polygonal and circle taper light pole. it is
automatic welding line, the dolly with speed adjustable motor can pull (or push)
the light pole from small end to big end, The hydraulic cylinder through mechanical
chain, Worm wheel push the clamping wheel to close the pole and do welding at the same time.
Type : Diameter 450 mm
Light Pole effective length :12000 mm
Welding type: Submerged Arc Welding / Gas- shielded welding(CO2) Welding both function ,We will produce according to your requirements.
The machine includes the following items :
- Long working table with rack for pull dolly.
- Dolly for pulling pole
- Hydraulic clamping and welding unit (including 3 sets clamping wheels for
- polygonal and circle pole)
- Submerged Arc Welding and Gas-shielded welding(CO2)
- Welding system, including welding wire feeding system.
- The flux recovering system
- back support unit
- hydraulic system
Technical Parameters
1
|
Workable Diameter
|
60-450mm,
|
2
|
Workable length
|
12000 mm
|
3
|
DOLLY LENGTH
|
1500 MM
|
4
|
Suitable light pole Thickness base on mild steel Q235
|
Light pole diameter: 60~450mm
|
2.8~3mm
|
Light pole diameter: 70~450mm
|
2.8~4mm
|
Light pole diameter: 250~450mm
|
2.8~6mm
|
5
|
Power of Motor for Pump
|
4 KW
|
6
|
Power of Motor for pulling dolly
|
4 KW, AC speed changeable type.
|
7
|
Welding Machine
|
630A, (Submerged Arc Welding and Gas-shielded welding(CO2) Welding
|
8
|
Welding wire diameter
|
1.2,1.6~2mm welding wire, according the pole thickness to do selection
|
9
|
Working Speed
|
1.1~2m/min (Note: different thickness speed will be different )
|
10
|
Gross weight
|
7500
|
11
|
Overall sizes (mm)
|
22000x2000x2000 mm (LXWXH)
|
Lincoln welding machine (USA BRAND)
Note:, If chose the Lincoln welding machine,normally it is suitable for Submerged Arc Welding
process
Fast motorized return back for dolly
Note:for the standard machine, the dolly return back can be motorized with working speed
, it is very slow for return back process. So, normally, the operator will open the dolly clutch and
push the dolly by manual.
In order to reduce the manpower, we have option: Fast motorized return back for dolly. The
operator only push button, the dolly will be back to the welding head.
See attached detail photos.
Both Side additional hydraulic cylinder
It is suitable for small diameter big thickness light pole, or steel plate with high tensile strength
light pole.With this additional option , the diameter from 60~450mm, thickness 2.8~6mm, all pole
can be suitable. And easy for operation.
Prodcut Catalog
