Brief introduction of pipe welding rotator:
This set of pipe welding rotator is using integrate basement for power unit & idler unit.
So as to ensure the rollers surface at the same level, saving foundation work for identity height adjustment.
Pipe welding rotator feature:
- Double-motor driven, the roller driver adopt cycloidal planetary gear reducer or worm reduction gear mode.
- Pipe welding rotator can adjust the center distance by lead screw in order to adapt to diameter of work piece.
- Lead screw adjustment is able to realize stepless center distance adjustment. Make the rotator more flexible for various diameter weldments.
- Lead screw adjustment is using motorized driven instead of hand lever. It largely shorten the equipment prepare time, elevating the working efficiency.
- Rollers are steel roller without PU.
- Depends on using purpose, PU roller or other special type roller is available as per customer requirement.
- It can joint control with other equipments.
Detail description of pipe welding rotator:
- Absorbing advantages of similar products at home and abroad, the weldign rotator is designed and manufactured by us according to the operation requirements of several pressure vessel factories.
- According with mechanical standard JB/T 9187-1999, it is the device for special purpose adopted to weld metal cylinder especially pressure vessel.
- It has advantages of advanced technology, reliable quality and simple operation.
Technical parameters list:
Model
|
HGKS-40
|
HGKS-80
|
HGKS-160
|
HGKS-300
|
HGKS-600
|
Max.Load capacity
|
40t
|
80t
|
160t
|
300t
|
600t
|
Vessel dia. Range (mm)
|
600~4200
|
800~5000
|
1000~6000
|
1000~7500
|
1000~7500
|
Dia.& width
of roller (mm)
|
Rubber
|
400x180
|
450x2x200
|
500x2x260
|
/
|
/
|
Metal
|
/
|
/
|
/
|
750x280
|
900x450
|
Adjustable mode
|
Lead screw adjustable (Manual / motorized optional) |
Motor power
|
2x1.5kw
|
2x3kw
|
2x4kw
|
2x7.5kw
|
2x11kw
|
Roller speed (m/min)
|
0.1~1 Variable Frequency Drive
|